wrought iron patio furniture
How to restore antique furniture and wrought iron patio set.?
I recently purchased an old wrought iron patio set and I give it a new Black Finish look.
First, you must remove the old finish on all the rust is there. Need a bare metal to start with a good finish. You can go to Sears and buy a sand timer for about $ 75 or rent one for about $ 7 per day. Add to the sand and fly off the line and mold. I have an old bank that had a production facility here locally that polishing and cleaning for me for $ 15. Welding shops and make "metal" do as blasting. Once clean, ready to start over. The best result is as automobiles. Without doubt, the best and most durable and cost are very reasonable for the arrival of this type. So buy a quart of primer Automotive. Spray a whole layer or two with a normal gun. Then apply the base coat color. Here a variety of colors, but does not say black, and then sprayed black base coat. After spraying the polyurethane clear coat with a bit of hardener in it. Give two coats of this finish. You have the best putting round and will last at least 20 years in the sun, rain, snow, everywhere. The total cost of this is about the same as going to Lowes and buy a type of paint that will surely not stay there, because it is resistant to sunlight, rain, and the weather as a car paint is.
